American Manufacturing Company of Texas v. Witter

343 S.W.2d 943, 1961 Tex. App. LEXIS 1763
CourtCourt of Appeals of Texas
DecidedFebruary 24, 1961
Docket16194
StatusPublished
Cited by7 cases

This text of 343 S.W.2d 943 (American Manufacturing Company of Texas v. Witter) is published on Counsel Stack Legal Research, covering Court of Appeals of Texas primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
American Manufacturing Company of Texas v. Witter, 343 S.W.2d 943, 1961 Tex. App. LEXIS 1763 (Tex. Ct. App. 1961).

Opinion

RENFRO, Justice.

Certain hereinafter named plaintiffs sued American Manufacturing Company for royalties allegedly due under a sublicense agreement originally executed July 22, 1941, between S. F. Keener and American for the manufacture of closed-end ordnance projectiles. Based on a jury verdict, judgment was entered for plaintiffs for a total sum of $34,385.01, representing royalties and interest for the years 1953, 1954 and 1955.

Appellant, in the trial court and on appeal, contends the plaintiffs could not recover because there was no privity between them and appellant, and they had no contractual right against appellant for their respective portions of the royalties. Plaintiffs were Madelyn H. Witter, Bernice M. Keener, Patricia Keener Butler, John F. Keener, H. W. Eddy and The Timken Roller Bearing Company. S. F. Keener died before the suit was filed. Prior to the execution of the contract with appellant, Keener had executed a contract with C. A. Witter under the terms of which Witter was to receive a certain percentage of any royalties paid to Keener by any sublicensee of Keener. Plaintiff Madelyn Witter is the surviving widow of Witter. Plaintiff Tim-ken, prior to Keener’s contract with appellant, had granted Keener exclusive license to use certain inventions of patents mentioned in the contract for which Timken was to receive a designated percentage of royalties. The Timken-Keener agreement was mentioned in the Keener-appellant license agreement. Appellant paid no royalties to anyone for the years for which plaintiffs were allowed recovery. Appellant does not claim that the recovery allowed the above two plaintiffs was or could be claimed by anyone else. The other plaintiffs claim under assignments made under the Timken contract by Keener before his death. It is appellant’s position that Keener could not assign his interest in the Timken contract to anyone else. The Timken-Keener agreement provided: “This agreement shall be binding upon and shall inure to the benefit and advantage of the successors and legal representatives of the parties and the assigns of Timken. It is understood that Keener is now contemplating the incorpora *946 tion of a company to which is to be transferred the assets of the business which he now operates under the name of Salem Engineering Company. It is agreed that in the event of such incorporation, Keener may assign, this agreement and his rights thereunder to such corporation, subject to the approval of Timken, but such assignment shall not relieve Keener of any obligations under this agreement.” It will be . noted that the agreement “shall inure to the benefit * * * of the successors and legal representatives of the parties”, and provided that Keener could assign to a planned corporation (which was not done) but the contract did not provide that the agreement was nonassignable and did not use words prohibiting assignments by Keener. In providing for “successors”, etc., it would seem that the agreement implied that Keener could make assignments under the agreement.

As stated in 6 Tex.Jur.2d, p. 404, sec. 5: “Generally any species of property and anything that may be called a debt, are assignable. And, as a general rule, all contracts, whether negotiable or not, are assignable under the statute authorizing an obligee or assignee of any written instrument not negotiable by the law merchant to transfer by assignment his interests to another. * * * The right to assign should ordinarily be presumed. The presumption arises where there is neither an expressed nor an implied prohibition against the assignment in the contract, and where nothing in the circumstances of its execution indicates any intention that it should^not be assigned.” See also Article 569, Vernon’s Ann.Tex.St.; 4 Am.Jur., pp. 234 and 235, secs. 5 and 7. The Keener-Timlcen agreement was not a personal service contract. In the absence of an agreement that Keener could not assign, we think the assignments mentioned were valid and plaintiffs were proper parties to bring suit thereunder. 4 Am.Jur., p. 234, sec. 5. The point of error is overruled.

Appellant bases a point of error on the action of the court in excluding testimony of a patent attorney distinguishing between “patents” and “licensed inventions” and tending to prove that no shell forging had been produced in accordance with the “inventions” for the years in question.

The agreement executed by appellant and Keener on July 22, 1941, recited that Tim-ken had granted a license to Keener under four different numbered patents known collectively as “Assel patents”, and that Keener had a right to sublicense, and that Keener had a right to grant licenses for Machine Rolling or Piercing Billets under the “Clark patent”, and “Whereas Keener has the right to grant licenses under any patent or patents that may be granted on patent application serial No. 312,499 for the Manufacture of Closed-End Tubes by Cross-Rolling, filed in the United States Patent Office on January 5, 1940, by C. A. Witter, of Philadelphia, Pennsylvania, hereinafter referred to as the ‘Witter application,’ which said Assel patents, Clark patent and any patent or patents issued on said Witter application are hereinafter collectively referred to as the ‘licensed patents’ and the inventions of said Assel patents, Clark patent and any patent or patents which may be issued on said Witter application are hereinafter collectively referred to as ‘licensed inventions,’ * * * therefore, * * * Keener hereby grants to Licensee a non-exclusive, non-assignable license under said licensed patents and any reissues thereof to practice throughout the United States of America the inventions described and claimed in said patents and patent application and any reissues thereof for the sole and exclusive purpose of manufacturing and selling closed-end ordnance projectiles and for no other purpose whatsoever. * * * If Keener shall hereafter own, control or secure the right to grant licenses under any additional patents covering any improvements upon the licensed inventions, or the products thereof, Licensee shall, from the date of the acquisition of Keener’s right therein, be licensed thereunder upon the same terms and conditions herein provided for the abovenamed li *947 censed patents and without payment of any royalty other than that herein provided.”

Paragraph 3 provided for payment of royalty by appellant and section (c) read: “The tonnage of shell forgings on which royalty is payable shall be that tonnage of shell forgings that are produced within the tolerances of specifications for shell forgings without a subsequent machining operation involving the removal of metal.” As later revised, said provision read: “The tonnage of shell forgings on which royalty is payable shall be that tonnage of shell forgings that is produced in accordance with the licensed inventions before a subsequent machining operation involving the removal of metal.”

Paragraph 4 provided for an annual statement from appellant showing number, size and weight of closed-end ordnance projectiles produced “under the license granted” during the preceding calendar year. Paragraph 6 gave Keener the right to inspect “all licensed equipment” installed by licensee. In paragraph 7 the licensee, appellant, admitted the validity of the licensed patents. Paragraph 8 pertained to possible improvements on any of the “licensed inventions” or “products” thereof.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Karl Keith Noland v. State
Court of Appeals of Texas, 2008
Smith v. Shar-Alan Oil Co.
799 S.W.2d 368 (Court of Appeals of Texas, 1990)
Oron Smith v. Shar-Alan Oil Company
Court of Appeals of Texas, 1990
Keith A. Nelson Co. v. R. L. Jones, Inc.
604 S.W.2d 351 (Court of Appeals of Texas, 1980)
Delta Enterprises v. Gage
555 S.W.2d 555 (Court of Appeals of Texas, 1977)
Intercity Investments Co. v. Plowman
542 S.W.2d 260 (Court of Appeals of Texas, 1976)
Humble Oil Refining Company v. Whitten
415 S.W.2d 287 (Court of Appeals of Texas, 1967)

Cite This Page — Counsel Stack

Bluebook (online)
343 S.W.2d 943, 1961 Tex. App. LEXIS 1763, Counsel Stack Legal Research, https://law.counselstack.com/opinion/american-manufacturing-company-of-texas-v-witter-texapp-1961.