Home/CFR/Title 46/Part 54
FEDERAL · 46 CFR

Part 54 — Pressure Vessels

57 sections · Title 46: Shipping

§ 54.01-1Incorporation by reference.
§ 54.01-2Adoption of Division 1 of Section VIII of the ASME BPVC.
§ 54.01-5Scope (modifies U-1 and U-2).
§ 54.01-10Steam-generating pressure vessels (modifies U-1(g)).
§ 54.01-15Exemptions from shop inspection and plan approval (modifies U-1(c)(2)).
§ 54.01-17Pressure vessel for human occupancy (PVHO).
§ 54.01-18Plan approval.
§ 54.01-25Miscellaneous pressure components (modifies UG-11).
§ 54.01-30Loadings (modifies UG-22).
§ 54.01-35Corrosion (modifies UG-25).
§ 54.01-40External pressure (modifies UG-28).
§ 54.03-1Scope.
§ 54.03-5General.
§ 54.05-1Scope (replaces UG-84).
§ 54.05-3Tests required.
§ 54.05-5Toughness test specimens.
§ 54.05-6Toughness test temperatures.
§ 54.05-10Certification of material toughness tests.
§ 54.05-15Weldment toughness tests—procedure qualifications.
§ 54.05-16Production toughness testing.
§ 54.05-17Weld toughness test acceptance criteria.
§ 54.05-20Impact test properties for service of 0 °F and below.
§ 54.05-25§ 54.05-25 [Reserved]
§ 54.05-30Allowable stress values at low temperatures.
§ 54.10-1Scope (modifies UG-90 through UG-103 and UG-115 through UG-120).
§ 54.10-3Marine inspectors and Coast Guard Symbol stamping (replaces UG-90 and UG-91, and modifies UG-92 through UG-103).
§ 54.10-5Maximum allowable working pressure (reproduces UG-98).
§ 54.10-10Standard hydrostatic test (modifies UG-99).
§ 54.10-15Pneumatic test (modifies UG-100).
§ 54.10-20Marking and stamping.
§ 54.10-25Manufacturers' data report forms (modifies UG-120).
§ 54.15-1General (modifies UG-125 through UG-137).
§ 54.15-3Definitions (modifies appendix 3).
§ 54.15-5Protective devices (modifies UG-125).
§ 54.15-10Safety and relief valves (modifies UG-126).
§ 54.15-13Rupture disks (modifies UG-127).
§ 54.15-15Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126).
§ 54.15-25Minimum relief capacities for cargo tanks containing compressed or liquefied gas.
§ 54.20-1Scope (modifies UW-1 through UW-65).
§ 54.20-2Fabrication for hazardous materials (replaces UW-2(a)).
§ 54.20-3Design (modifies UW-9, UW-11(a), UW-13, and UW-16).
§ 54.20-5Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48).
§ 54.23-1Scope (modifies UB-1).
§ 54.25-1Scope.
§ 54.25-3Steel plates (modifies UCS-6).
§ 54.25-5Corrosion allowance.
§ 54.25-7Requirement for postweld heat treatment (modifies UCS-56).
§ 54.25-8Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57).
§ 54.25-10Low temperature operation—ferritic steels (replaces UCS-65 through UCS-67).
§ 54.25-15Low temperature operation—high alloy steels (modifies UHA-23(b) and UHA-51).
§ 54.25-20Low temperature operation—ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), UHT-6, UHT-23, and UHT-82).
§ 54.25-25Welding of quenched and tempered steels (modifies UHT-82).
§ 54.30-1Scope.
§ 54.30-3Introduction.
§ 54.30-5Limitations and requirements.
§ 54.30-10Method of performing mechanical stress relief.
§ 54.30-15Requirement for analysis and computation.