Home/CFR/Title 46/Part 162
FEDERAL · 46 CFR

Part 162 — Engineering Equipment

88 sections · Title 46: Shipping

§ 162.017-0Preemptive effect.
§ 162.017-1Incorporation by reference.
§ 162.017-2Type.
§ 162.017-3Materials, construction, and workmanship.
§ 162.017-4Inspections and testing.
§ 162.017-5Marking.
§ 162.017-6Procedure for approval.
§ 162.018-1Applicable specifications, and referenced material.
§ 162.018-2Scope.
§ 162.018-3Materials.
§ 162.018-4Construction and workmanship.
§ 162.018-5Blow-down adjustment and popping tolerance.
§ 162.018-6Marking.
§ 162.018-7Flow rating tests.
§ 162.018-8Procedure for approval.
§ 162.027-1Scope.
§ 162.027-2Incorporation by reference.
§ 162.027-3Design, construction, testing, and marking requirements.
§ 162.027-4Approval procedures.
§ 162.028-1Incorporation by reference.
§ 162.028-2Classification.
§ 162.028-3Requirements.
§ 162.028-4Marine type label.
§ 162.028-5Recognized laboratories.
§ 162.028-6Examinations, tests, and inspections.
§ 162.028-7Procedure for listing and labeling.
§ 162.028-8Termination of listing or labeling.
§ 162.039-1Incorporation by reference.
§ 162.039-2Classification.
§ 162.039-3Requirements.
§ 162.039-4Marine type label.
§ 162.039-5Recognized laboratories.
§ 162.039-6Examinations, tests, and inspections.
§ 162.039-7Procedure for listing and labeling.
§ 162.039-8Termination of listing or labeling.
§ 162.050-1Scope.
§ 162.050-3Definitions.
§ 162.050-4Incorporation by reference: Where can I get a copy of the publications mentioned in this part?
§ 162.050-5Contents of application.
§ 162.050-7Approval procedures.
§ 162.050-9Test report.
§ 162.050-11Marking.
§ 162.050-13Factory production and inspection.
§ 162.050-15Designation of facilities.
§ 162.050-17Separator test rig.
§ 162.050-19Oil content meter and bilge alarm test rig.
§ 162.050-20Separator and bilge alarm test fluids.
§ 162.050-21Separator: Design specification.
§ 162.050-23Separator: Approval tests.
§ 162.050-25Cargo monitor: Design specification.
§ 162.050-27Oil content meter: Approval tests.
§ 162.050-33Bilge alarm: Design specification.
§ 162.050-35Bilge alarm: Approval tests.
§ 162.050-37Vibration test.
§ 162.050-39Measurement of oil content.
§ 162.060-1Purpose and scope.
§ 162.060-3Definitions.
§ 162.060-5Incorporation by reference.
§ 162.060-10Approval procedures.
§ 162.060-12Use and acceptance of existing test data.
§ 162.060-14Information requirements for the ballast water management system (BWMS) application.
§ 162.060-16Changes to an approved ballast water management system (BWMS).
§ 162.060-18Suspension, withdrawal, or termination of approval.
§ 162.060-20Design and construction requirements.
§ 162.060-22Marking requirements.
§ 162.060-24Test Plan requirements.
§ 162.060-26Land-based testing requirements.
§ 162.060-28Shipboard testing requirements.
§ 162.060-30Testing requirements for ballast water management system (BWMS) components.
§ 162.060-32Testing and evaluation requirements for active substances, preparations, and relevant chemicals.
§ 162.060-34Test Report requirements.
§ 162.060-36Quality Assurance Project Plan (QAPP) requirements.
§ 162.060-38Operation, Maintenance, and Safety Manual (OMSM).
§ 162.060-40Requirements for Independent Laboratories (ILs).
§ 162.060-42Responsibilities for Independent Laboratories (ILs).
§ 162.161-1Scope.
§ 162.161-2Incorporation by reference.
§ 162.161-3Materials.
§ 162.161-4Construction.
§ 162.161-5Instruction manual for design, installation, operation, and maintenance.
§ 162.161-6Tests for approval.
§ 162.161-7Inspections at production.
§ 162.161-8Marking.
§ 162.161-9Procedure for approval.
§ 162.163-1Scope.
§ 162.163-2Incorporation by reference.
§ 162.163-3Performance, design, construction, testing, and marking requirements.
§ 162.163-4Approval procedures.